Smoke without affecting your health now!

Are you a chain smoker? Or your loved ones are highly addicted to smoking? If you are under any of these two cases, this article will favor you to a greater extent. This article is written in order to create awareness on the harmful effects of smoking. Even though you knew that smoking is dangerous as per the statement in the cigarette package, you would have not known about their severe impacts on the human health and life. This article is narrated to reveal all these factors. And will help you to find the best solution for your problem.

eliquid depot

Smoking and cigarettes

Smoking is not a habit that comes from gene. People get into the trap of smoking only because of their personal compulsion. In some cases, they smoke in order to get revealed form their daily work stress. In some cases, they are used only for the feel of luxury in it. And in many cases, people admit it from their friends/ other family members. Thus, smoking occurs because of one’s personal interest. This play which is started for fun goes serious in a course of time. High addiction to tobacco/ nicotine converts them into chain smoker. According to the medical statement the people who smoke will have very low lifespan when compared to the non smokers. The most astonishing fact is the smokers were well aware of these factors. But because of their addiction they were unable to stay back from it.

And coming to the traditional cigarettes they are made of out of tobacco. The nicotine content present in these cigarettes is the main reaction for the addiction. Even though these substances sound to be harmless, they are capable of reducing human lifespan to a greater extent. These substances are the reason for lung failure in many cases. When people’s interest gets combined with addiction they cause severe impact on the individual and as well as their surroundings.

Health impacts of smoking

When compared to the people who rarely smoke, the chain smokers will get affected by severe health disorder within short span of time. This doesn’t mean that there is no impact on the other smokers. It will take more time to feel the effects in those cases whereas in chain smokers they can be realized within short time span.  According to the medical survey held last year, it was found that more than two millions of people are facing death every year because of smoking. The other adverse effect of smoking is they not affect the people who smoke but also the people in the surrounding who tend to inhale the smoke during respiration.

One of the most adverse health effect caused because of smoking is the cancer. The chain smokers will get affected by lung cancer, mouth cancer and throat cancer. This implies that the dead cells occur in all the places where the smoke travels and reaches the respiratory organ. When compared to other organs the lungs get severely affected as the smokers tend to inhale the most hazardous smoke more often. Because of this impact the lungs will start malfunctioning and there occurs the breathing trouble and other respiratory problems which finally lead to death.

Addiction

Have you ever thought why these people were unable to quit their smoking habit? If you have not found the right answer here it is for you. This is because of the addictive present in it. Nicotine is a kind of harmful drug like cocaine. The people who once enjoy the luxury in it cannot give up so easily. Even if they think of quit smoking, they cannot. This happens because their mind cannot accept the sudden change. They will get severely depressed in case if they are forced to quit. The only solution is these people must be provided with the best alternative or they must be taken to expert’s counseling.

E-cigs

Today there are enormous electronic cigarettes in the market which can be preferred for the smokers. These electronic cigarettes provide the comfort of smoking without causing any impact on the health. This is made possible because of the natural liquid used in them. The eliquid are completely free from hazardous chemicals and help them give out harmless vape. Thus, any people who are addicted to smoking can quit easily by choosing the electronic cigarettes.

Easy Vaporizing With Extreme

Released to the mass market in 2008 by the renowned Canadian vaporizer manufacturer, Arizer, the Extreme Q Vaporizer easily won customers’ heart by giving better, user-friendly unit design, faster heat up time and a range of other useful features that were not available in the previous models. With upgraded unit that is equipped with triple heat sensors, well-designed remote controller and an AC adapter, the Extreme Q Vaporizer offers easy controlling and cleaning. In fact, it is the only vaporizer device today to have a remote controlled activation system.

The stainless steel Extreme Q is lightweight and highly portable. Its upper part sits securely on a lower stainless steel base with LCD display screen and function buttons on it. When you purchase the Extreme Q Vaporizer, you do not just purchase an ordinary vaporizer. This vaporizer could work in a three different ways: as a potpourri warmer, as an oil diffuser, and as an aromatherapy vaporizer. The three-in-one Extreme Q Vaporizer comes with a Potpourri Dish and a Potpourri sample to get you started. Average heat-up time is about 2 to 3 minutes, and the Vaporizer temperature could go from as low as 104 degree Fahrenheit to 400 degree Fahrenheit. Meanwhile, cooling down time is also fast, about 2 minutes each time.

Speaking of the temperature, the Extreme Q Vaporizer digital temperature control and auto timer allows user to utilize different types of herbs to vaporize and automate the timer. Its auto timer allows for auto shut off feature that allows the vaporizer to shut off by itself up to 4 hours from the time you turn on the vaporizer, according to your auto timer customization. The super-long vapor whip works to provide traditional vaporizer experience, while the inert tubing (balloon fill system) allows for different densities of the vapor filling according to your preferences. Extreme Q balloon fill system, combined with three speed follower system allows for rich vaporization experience.

To get things started, simply turn on the Extreme Q and set the temperature to its highest setting for about 30 minutes to fully eliminate (burn out) the manufacturer’s packing oils on the Extreme Q Vaporizer. You may put your favorite herbs to the Extreme Q Vaporizer Pyrex cyclone bowl and adjust the temperature to 350 degrees, which is a good starting temperature for vaporization. Let it sit about 1-2 minutes before you attach the Extreme Q Vaporizer extra-long whip.

Back to the vaporizer, the LCD display’s control panel allows user to check and set the temperature, fan speed, timer, and actual temperature every now and then. You can even choose whether to view the Extreme Q temperature in Celsius or Fahrenheit. The Extreme Q remote control also allows for easy activation of the vaporizer from a distance, the way you want it to: from changing the fan speed, temperature, timer, to the LCD light on the base, operation is as easy as 1-2-3. This vaporizer comes with a lifetime warranty that is limited to normal use for the heating element and the LCD display.

For you who live in North America and are worried about the voltage, the Arizer Extreme Q is shipped complete with a 110 volt system. Purchasing replacement parts is uncomplicated and the parts are affordable. Considering the features offered and value, the Extreme Q Vaporizer is a great option for people who are using vaporization a lot, and are looking for quality vaporizer at great value.

Product features:
– Triple Heat Sensors For Better Temperature Control
– New Design 1 Remote Control w./3V Lithium Battery (Type: CR 2025)
– Quieter Fan Powered
– New Model Extreme Q Improvement
– Upgraded unit design and faster heating
– 1 Mini Whip For Balloons
– 2 Balloons
– 1 Glass Stirring Tool
– 1 Three Foot Whip
– 2 Cyclone Bowls
– 2 Extra Rechargeable Mouthpieces
– Extra Screens
– Potpourri Dish
– Detachable 110-220 V World Wide Power Adaptor
– Manual instructions

Smoking Ban Affected the Electrical Industry

A significant increase in sales of outdoor lighting products such as floodlights has been witnessed since the ban, with sales rising by 40% as drinkers go outside. With the smoking ban now well in force, clubs and pubs have been reporting that unpleasant odors like sweat and stale beer – formerly masked by cigarette smoke – are highly noticeable. As a result, in addition to an increased demand for outdoor heating and lighting since the ban, there is also a greater need for ventilation systems.

There are important decisions to be made when selecting outdoor heating and indoor ventilation units, while keeping an ever-watchful eye on tightening purse strings.

A significant increase in sales of outdoor lighting products has been witnessed since the ban, with sales rising by 40% as drinkers go outside. However this is not the only change, as sales of outdoor heating products have also surged in a bid to keep smokers drinking at their favourite local instead of staying at home.

While the majority of contractors have spotted the obvious opportunities this brings, recommending the wide variety of outdoor heating equipment available, many are still missing out on the additional key factor to consider – effective controls.

Providing an off delay after the last observed movement can save an average of 80% on energy wasted. Controls need to be a vital part of any installation, ensuring appliances are only operational when needed. With the recent rise in energy costs, it is not environmentally or commercially astute to have the heating and lighting on from 8pm until closing time and so by choosing to install PIRs or thermostatic controls, businesses are ensuring that energy is used only when required – reducing both energy costs and the carbon footprint.

This need can be easily met by wall mounted PIR sensors, which detect presence by passive infrared, effectively enhanced for the smallest of movements. Providing an off delay after the last observed movement can save an average of 80% on energy wasted. Microwave sensors are another option open to installers as these devices are directional presence detectors with built in photocell use, utilizing microwave technology and featuring a movement detector.

Time delay switches also allow pubs to activate heating only when the outdoor area is in use. These have been in operation for many years, used in less frequented areas or those where entry and egress is at different points. During the last few years with a focus on energy efficiency, these have been revamped. Gone are the pneumatic timers that slowly released before cutting the power, now they are electronic and fully programmable to whatever time setting is required.

The additional benefit with heat recovery systems is that they can recover up to 95% of the heat normally lost from the building…

Programmable thermostats also offer an alternative way to regulate how long outdoor heating is in operation, with independent time settings, easy to use menu controls and set on/off periods available.

With controls being the priority outdoors, ventilation systems are now becoming a concern for pubs and clubs indoors, as they seek to combat stale odors, which were previously masked by tobacco smoke. Food odors coming from the kitchen, as well as smells from toilets and stale beer spilled onto carpets, now need to be extruded out of the building, as cigarette smoke no longer masks these pungent aromas.

The indoor air quality has therefore changed substantially and as a result where a refurbishment is needed many pubs and clubs have moved away from traditional ventilation systems and are installing air conditioning units and air handling products, as they allow more control and a better quality of air. However where this is simply not an option, establishments are upgrading their ventilation to combat the problem, whilst simultaneously reducing their energy costs.

The industry has seen a substantial increase in the sale of more energy efficient ventilation choices. LoWatt products are especially popular, as apart from efficiently removing stale air, they also offer up to 80% energy savings – a welcome additional benefit with soaring energy bills looking set to stay.

Heat recovery units are also starting to be introduced into pubs and clubs as they offer the ability to remove odors but at the same time recover the heat. These systems are designed to completely change all the air at least once every couple of hours (and this can be increased when the demand requires), continually replacing the stale odors with fresh, warm, clean, filtered air. The additional benefit with heat recovery systems is that they can recover up to 95% of the heat normally lost from the building through trickle vents and other breakout points in the building’s structure.

Now a year after the smoking ban was introduced, instead of just focusing on heating products, installers and contractors increasingly need to look at the bigger picture in order to fully maximize the profit margins available. In terms of the outdoors, this includes the wide variety of controls and sensors available for such areas to prevent energy from being wasted and energy bills increasing unnecessarily. While indoors, energy efficient ventilation systems need to be the predominant focus, providing the easiest and most cost effective way to effectively eradicate any odors unveiled by the removal of tobacco and ensure a fresh, welcoming environment for drinkers.

Tips to Get Rid of Cigarette Smell

Getting Rid of Cigarette Smoke Smell for Smokers

While researching this topic, I asked a relative for some practical advice to rid my house of cigarette smoke. Their answer was immediate and to the point: QUIT SMOKING! Who isn’t tired of hearing that one? The truth is that cigarette smoke permeates into our furniture, our carpets, our walls, our windows, and just about every other nook and cranny in our homes. Us smokers are generally unaware of the smell. The same problem exists in our cars. There are large numbers of people who are allergic to cigarette smoke, or suffer some very serious breathing issues when they come into contact with it. Even the lingering smell of cigarette smoke left in a home or a car by its previous occupants is not just noticeable, but may be close to intolerable to a non-smoker.

So if you’re not ready to kick the habit just yet, let’s explore some methods of controlling the cigarette smoke in our environments. Who knows, the next person to bask in your odor may be a hot date or prospective employer and if they don’t smoke, a noticeable odor will definitely make an impression.

Get the Smoke Out!

If you smoke inside, devise a system that pulls the smoky air outside of your home so it doesn’t have time to set on your surroundings such as smoking in front of a window fan that is set to expel air from the room. Despite the people who feel second hand smoke is a health risk even if you are smoking outside in a wind storm, the smoke needs to be trapped inside an enclosed area to deposit its odor.

Make a Smoker’s Lounge

If you have any rooms in your home which are seldom used, consider making one your smoker’s lounge and furnish it accordingly. This room will wreak, but it will also keep you from stinking up the rest of your home. Better yet, set up shop on your porch or patio to keep the stink out of your house entirely.
Purify the Air

There are tons of air purifiers on the market that claim to remove cigarette smoke and odor from the air before it gets a chance to turn your windows yellow. Many of them call themselves “ozone” based air cleaners. They run the gambit from crap to somewhat effective, but even the best ones only work in the room where they are placed. If you only have an occasional smoke then a good air purifier might be just what you are after, but for daily smokers these will only drain your wallet along with your electricity.

Mind Your Butts

A single ashtray can stink up a room almost as quickly as a lit cigarette. You can fight this menace by placing an absorbent substance in your ashtrays. This works both inside your home, and in your car. Baking soda works wonderfully, just pour enough in your ash tray to submerge your butts and use it to extinguish and bury the tip of your cigarettes when you are finished with them. This is not going to solve the problem 100%, but it will help. It will not only help diminish the smell of an ashtray full of extinguished butts, but will also draw some of the smoky odor out of the surrounding air. It is certainly a lot cheaper than putting an “ozone generating, state of the art titanium based corona and ultra violet light” air cleaner in every room of your house. Even if you can plug one into the cigarette lighter of your car, you’re still going to need to unplug it to light your next cigarette. Ashtrays with air-tight lids will also do the trick.

Your Clothing and Your Breath

If you find yourself in a situation where you really need to keep your person free of cigarette smoke smell, but you want to light up regardless then here’s what you do. First, smoke outside facing away from the wind, upwind from any other smokers in the vicinity, if you have an overcoat with you, wear it. This will keep most of the smoke away from your clothing. After you’ve finished your stogie, remove your coat and stand out in the wind a little longer to flush your person with fresh air. If it’s not particularly windy, take a brisk walk. As for your breath, the best you can do is brush your teeth, gargle with a strong mouthwash, and follow that up with the strongest mint you can handle.

Fall in Love with a Fellow Smoker

You might as well face it. Your body, your clothes, and most of all your breath are going to smell like cigarettes. Also, your teeth are going to turn a bit yellow. Cigarette smoke can be removed from the body and your clothing with normal washing. You can use whitening toothpaste, brush three times a day, use lots of mouthwash, and visit the dentist daily for professional teeth cleaning and this will remove all traces of cigarette smoke from your body, your clothes, and your breath… until about ten minutes later when you light up your next Marlboro.

Cigarette smoke smell can be reduced, and it is a polite thing to try, but as long as you smoke, the problem of their lingering odor will exist, and non-smokers will be unhappy with it. Oh well.
Getting Rid of Cigarette Smoke Smell for Non-Smokers

If you are a non-smoker, and have become the owner of a home, car, book, or sofa that once belonged to a smoker, you are likely here because you want to remove that awful cigarette smoke smell. Here are some suggestions:

Cigarette Smoke Smell in Furniture

* The Fabreeze Controversy

When confronted with any odor on furniture, curtains, or bed linens, the natural thing to do is reach for a deodorizer such as Fabreeze. Some argue that this simply masks the odor temporarily and it will return as soon as the spray product evaporates. There have also been reports of breathing problems associated with the use of fabreeze and other deodorizers. Others swear it doesn’t work anyway. It just turns the odor into a disgusting blend of smoke and the great outdoors. If the odor your battling is very weak, it’s worth a try. If it’s strong then don’t even bother.

* Get it Steam Cleaned

Cigarette smoke smell in fabrics emanates from tar ash and oil deposits left in it’s fibers. In order to remove the smell, you need to remove these deposits. Unfortunately, when cigarette smoke condenses onto something, the resulting ‘goo’ is very, very stubborn. If you’ve ever cleaned (scraped) this residue off of glass or painted walls you know exactly how stubborn it can be – imagine that same goo stuck in every fiber of the piece of furniture you wish to clean. The bottom line is that household cleaners just won’t cut it, hire some professionals to come and clean it for you. Make sure they use a van-mounted steam cleaner and tell them exactly what your objective is so they can use the appropriate cleaning solution.

* Low Budget?

Completely cover the piece of furniture you’re cleaning with baking soda and then rub it and pat it into the fabric so it gets as far into it as possible. Let it sit overnight and then vacuum it all back up.

* Get Rid of it

This is not meant to be flip, but sometimes you just have to cut your losses. When cigarette smoke gets deeply enmeshed into the fabric of an ex-smokers favorite couch, there may be nothing that will ever get it out. Unless you enjoy reupholstering furniture, you might just have to throw it away. Better yet, sell it to a smoker.

Removing Cigarette Smoke Smell from Carpets

Carpets aren’t as hard as walls, but they’re still a lot of work.

* Rent a Shampooer

Most home improvement stores have carpet shampooers available for rental. Go pick one up, along with a bottle or so of shampoo, and get to work. A good carpet shampooer can remove the cigarette smell, but it may take several passes through each room to get it all. To make your job easier, sprinkle baking soda liberally over your entire carpet the night before you plan on shampooing, and vacuum it up just before using the carpet shampooer.

* Call in the Professionals

Get the carpets a serious and professional cleaning. Hire a carpet cleaning company that uses van-mount steam cleaners. Tell them exactly what your goal is so they can use the appropriate cleaning agent when they arrive. If you have furniture to de-smokify, make sure they use smaller upholstery attachments and not the huge vacuum-like wand they use on your carpets.

* Low Budget?

Fill a large tub with bicarbonate of soda (baking soda), add a few drops of essential oil and mix well. Lavender smells nice, but the flavor is up to you. Sprinkle the mixture liberally over the carpet, let it sit for at least four hours and then just vacuum it up. Repeat as necessary.

Cleaning Cigarette Smoke Residue from Walls

Cleaning a smoker’s house is a nightmare, brown and yellow stains will be on everything from the windows to that intricate crown molding. Unless you’re willing to hire somebody else for the task, get ready for a lot of work.

* Vinegar

Next to Italian salad dressings, this may be vinegar’s most important job. Even if you are going to paint the walls, you still need to clean them first. In a large bowl or bucket mix one cup of white vinegar for every two cups of warm water, then add a scoop of baking soda – it should fizz. Use a sponge mop or brush to wash down your walls and ceilings with it. This solution will make residue much easier to remove and should be easy on your paint too. Follow this up with a vinegar based window washer for windows (can be found in organic grocery stores), and your basic bubbly vinegar/baking soda mix on the window moldings.

* Paint

If you’re still not happy with the result, you can attempt the last step again, or just repaint your walls.

Removing Cigarette Smoke Smell from your Car

* Good old Vinegar

The same mixture of vinegar and baking soda that you used on the walls inside the house can work on the interior of the car (one cup of white vinegar for every two cups of warm water along with a good scoop of baking soda). Wash down the windows, plastic moldings, and metals with a generous amount on a sponge. Don’t use this on fabric, however. Treat fabric as you would carpet inside – saturate it with baking soda, spray with a diluted solution of essential oil and water (optional), let sit overnight, and vacuum.

* Cigarette Smoke Smell Home Remedies:

There are almost as many cigarette smell removal remedies as there are people. Some of the ideas appear to mask the smell with another more powerful odor rather than to remove, so be sure you are going to be happy with the result. Here are some of them:

o Fill a tub with vinegar and place it on the floor in the front seat, close the windows, open the floor vents and turn on the heat full blast. Let the car run in this state for an hour before removing the tub. Another version of this remedy requires hot summer weather and allowing the tub sit on the floor with the windows closed all day.

o Leave an opened bag of charcoal in the car overnight.

o Put a few drops of vanilla extract on a rag and toss it under the seat.

o Put a sliced apple in a cup and set it on the floor. Leave it until it shrivels.

o Sprinkle dry coffee grounds on the floor of the car, let them sit there for a few days and vacuum them up.

o Mix of apple sauce and cinnamon and put it into a jar with holes punched in the lid. Place the jar on the floor of the car.

Which ever method you try, be prepared for several re-applications. You are going to most likely need them. If you have any tips to make this easier, please share them with the rest of us using the form below. Good luck!

Next Quit Smoking Device

images-4Ever since the public became aware about the dangers of smoking a few decades ago, many people have found quitting the tobacco habit hard. Companies have been innovating and manufacturing smoking cessation products for many years now. From nicotine patches to gum, nicotine addicts have been using them to quit their habit.

Electronic cigarettes (also known as e-cigarettes and electric cigarettes)are the newest product on the market. They are designed to look and feel like real cigarettes, even down to emitting artificial smoke however they do not actually contain any tobacco. Users inhale nicotine vapour which looks like smoke without any of the carcinogens found in tobacco smoke which are harmful to the smoker and others around him.

The Electronic cigarette consists of a nicotine cartridge containing liquid nicotine. When a user inhales, a tiny battery powered atomizer turns a small amount of liquid nicotine into vapour. Inhaling nicotine vapour gives the user a nicotine hit in seconds rather than minutes with patches or gum. When the user inhales, a small LED light at the tip of the electronic cigarette glows orange to simulate a real cigarette.

The nicotine cartridges themselves come in various strengths. Most of the major brands, such as the Gamucci electronic cigarette have full strength, half strength and minimal strength. This is designed for people who want to quit smoking. As they get used to using the electronic cigarette, they can gradually reduce the strength they use until they quit.

The main advantages electronic cigarettes have over nicotine patches or gum is firstly, users have the nicotine hit much quicker and secondly, because a big reason why smokers fail to quit suing patches and gum is because they still miss the act of inhaling smoke from a cylindrical object. The electronic cigarette emulates that even down to the smoke.

The electronic cigarette is also beneficial from a financial perspective. A set of five nicotine cartridges costs around £8 and is equivalent to 500 cigarettes. Although the initial investment of an electronic cigarette kit of £50 may seem steep at first, users save money in the long run.

As with many popular products, there have been a great number of cheap Chinese imitations flooding the market. They are usually half the price of a branded electronic cigarette and look like the real thing as well. It is inadvisable to use these because they have not been subject to the same rigorous testing the official electronic cigarettes have and can potentially be highly damaging to the user’s health.

As electronic cigarettes become more and more popular, they are increasingly used to smoke in pubs and clubs with a smoking ban. Electronic cigarettes seem to be the next thing and may soon replace real cigarettes in clubs.

Four Weird Uses of Vaporizers

Vaporizers are often associated with colds and babies. Although they are very effective against fighting off colds they have other uses as well.

This article discusses four uses of vaporizers which do not fit into the baby plus colds genre. Read on to find out more, you may be surprised at the ways other people use their vaporizers.

Treat Ear Infection

Believe it or not vaporizers can be used to treat ear infections. A lot of ear infections are caused by the ear canals drying up too much. What’s even weirder is that germs that cause colds can pass through the ears. And vaporizers do a good job of killing them too.

Treat Bronchitis

Bronchitis might seem like a very serious disease but a lot of people suffer from it with varying levels of intensity. Inhaling medicated menthol and eucalyptus has been reported to do wonders for a lot of patients who suffer from chronic bronchitis.

Treat Dogs

Most of us never stop to think that our dogs are exposed to as much germs as we are. Most of us never bother to think about respiratory problems which are dog may contract. When was the last time you heard a puppy owner say their pets had “kennel cough?”

If you have heard about that then you probably know more about dogs than the average person. And if you knew that vaporizers are often used to treat diseases such as these in dogs you are most likely a breeder or a vet!

Help Stop Smoking

People who want to stop smoking miss the aroma of their favorite stick. Very often smokers who are not presently smoking will chew or suck on a candy that is menthol or mint flavored.

Vaporizers offering the same aroma can alleviate the temptation to reach out for another cigarette. A lot of ex-smokers have a vaporizer or two at home giving out these soothing aromas that do not cause cancer.

Vaporizers are a versatile appliance. These are only some ways to use them out of your nursery and child’s room. Don’t hesitate to use one of the mentioned methods above to make better use of your very own vaporizer.

Tips to Vapor Steam Cleaning

images-5Are you looking for a way to clean that involves less elbow grease? Are you looking for a healthier way to clean? Have you considered switching to vapor steam cleaning? Vapor steam cleaning is a unique cleaning method that uses high temperature (240 to 280 degrees), water vapor, and pressure to clean, sanitize and deodorize in one easy operation. Although these systems have been around since the 1970s, the early models were expensive and cumbersome. Models of steam vapor machines on the market today are lighter, easier to use, and affordable.

How does the cleaning process work? Steam vapor machines heat tap water to an extremely high temperature so the water forms a fine, dry mist. There is no need to use chemicals in the cleaning process – the heat actually does the cleaning for you. The water is placed in a sealed boiler and heated until it gets to the right temperature. This usually takes about 25 minutes until the system is ready to use.

It is the dry steam that dislodges soil and stains. The high temperature softens grease and oils that make soil stick to surfaces. The steam also gets into those hard to clean areas – sliding door tracks, window sills, and the nooks and crannies that can be difficult to clean. Once the pressure of the steam dislodges soil, grease and debris, it is wiped or vacuumed away. The surface is left not only clean, but sanitized. The high temperatures used in the cleaning process not only cleans, but also kill germs and bacteria.

Vapor steam systems use as little as 1 – 1 ½ quarts of water per hour. This is because the vapor is created at a high temperature with very low moisture content. The vapor contains only 5 or 6% water, so there is less mess and surfaces dry quickly, usually in 15 minutes. Safety concerns of using steam are slight, as the temperature of the steam drops dramatically as it leaves the machine and merges with the surrounding air.

The overall benefits of using a vapor cleaning system include:

* Equipment is easy to use and has great accessibility. Steam vapor units can reach into those small spaces and corners that traditional cleaning methods have a hard time reaching.

*As no chemicals are used, there is a benefit to indoor air quality. In addition, it reduces the risks and hazards that come with chemical use, and there is no chemical residue left after the cleaning process.

* Vapor systems are great for carpet spot removal.

* Vapor cleaning kills mold spores in bathrooms and kitchens.

* Because vapor cleaning uses only water, there is no chemical residue left behind after cleaning.

* Less physical effort is needed, meaning less burnout by your employees.

Advanced Vapor Technologies, which makes several models of steam vapor cleaning systems, recently worked with the cleaning staff at the University of Washington. One of the daunting tasks that staff has is to clean a 123,312 square foot library, which is open 24 hours a day. Technical specialists from Advanced Vapor Technologies trained custodial workers on the use of their Mondo Vap 2400 steam vapor cleaning system. They conducted a six-week test to determine the effectiveness of the equipment.

The equipment was well received by the staff who noted that the extension handle made cleaning hard-to-reach areas – such as behind toilets and urinals – much easier. Using the equipment took no more time than the traditional methods of cleaning and there was a higher degree of cleanliness and reduced drying time. The risk of cross contamination was also minimized since no dirty mop water or mops were used throughout the restrooms. If cleaning staff faced tough soils, they pretreated with a non-VOC solution before using the steam vapor system. This process proved to be more efficient than either steam or chemicals used alone.

You can use the machines to clean floors, walls, ceilings, windows, carpet, kitchens, bathrooms, blinds, glass, and upholstery. Because of the heat of the steam, the systems are not practical for surfaces that are heat sensitive – such as silks, some thin plastics, and some types of velour upholstery.

Steam vapor systems are available for both residential and commercial use. Residential systems start out with a price tag of around $400. Commercial systems run from $1600 to $3200.

Although steam vapor systems have been around for many years, the first models were cumbersome, expensive and ineffective. Models that have been introduced in the last couple of years are efficient, compact, easy to use, and affordable. With the continued interest in green cleaning, the investment in a steam vapor system is one way to decrease the use of chemicals while still ensuring that you have a high degree of cleanliness. New technologies can be tough to incorporate into your existing cleaning protocol, but a steam vapor cleaning system can be an easy and profitable adjustment for your cleaning company.

Vaporizer Heating Elements

Anyone who has taken two seconds to survey the breadth of the vaporizer market quickly notices that various brands tout their heating element as “the best available” while pointing out health risks associated with their competitors’ models. Evaluating all these (sometimes conflicting) statements can be quite a task. The purpose of this article is not to endorse a specific type of heating element, but instead to gather the available information about heating elements in one place to aid people in making informed decisions when buying a vaporizer.

Why Do Heating Elements Matter? The heating element is the most integral part of any vaporizer. It regulates the temperature of the air that catalyzes the active ingredients as the air passes through it. A note: the air passing through the heating element may be either propelled by a pump in balloon-style models i.e. the Volcano Vaporizer or by one’s own in direct-inhalation style vaporizers i.e. the VaporCannon. Some models, such as the herbalAire, are capable of both balloon and direct-inhale style vaporization. A primary requirement for all heating elements is precision – you want your vaporizer to actually be at the temperature you set – but health considerations may also play when people shop for vaporizers.

Types of Heating Elements:

#1: Ceramic

Ceramic heating elements are the most commonly type of heating elements. Their proponents argue that they are the cleanest and therefore healthiest option. This statement holds some truth: ceramics can withstand very high temperatures (about 3000*F) before the material starts to transform to a gas and are therefore very clean and healthy. Some companies take this logic a step further and argue that since other types of heating elements have lower “boiling points” they are dirtier and less healthy. This argument is somewhat flawed: while other heating elements have lower boiling points, these points are usually still well in excess of typical vaporizing temperatures. Read about the specific types below for more info.

Another important consideration when evaluation vaporizers with ceramic heating elements is the quality of the ceramic unit because the term “ceramic” is used to describe types of elements that are quite different in design. This is due to the fact that “ceramic” merely refers to whether or not the unit incorporates some ceramic into the heating element’s design, it does not mean that the air only touches ceramic material. This makes buying vaporizers with ceramic heating elements difficult unless one knows the specifics of the designs used by each manufacturer. As a general rule of thumb cheaper vaporizers are more likely to have exposed low-quality wire or solder within the heating element’s ceramic structure that can emit toxins. So steer clear of that digi vape if you want quality vapor. While the only definitive test is to take an element completely apart to see how it is constructed, some manufacturers will address these questions if you contact them. The manufacturers of the low quality models will dodge them.

Low quality ceramic elements reflect poorly on all ceramic heating elements, which is unfortunate because a well-designed ceramic element is very clean. Top of the line ceramic heating elements are very precise too, although precision is also a function of the circuitry and computer chip technology used with the heating element.

Examples of vaporizers with good ceramic heating elements: VaporBrothers, Phedor and Hotbox

#2: Aluminum

Some of the best vaporizers on the market use aluminum heating elements. Manufacturers say that aluminum is more precise than ceramic elements because it responds faster the temperature changes:

“One reason the Volcano maintains such perfect temperature control is because it uses an aluminum element and block, and aluminum has different properties than potential practical designs using ceramics. An aluminum element and block can more rapidly adjust for effects of air pressure and flow over plant material…the key to vaporization is maintaining control over temperature and flow, which ultimately leads to more perfect control over vapor density.”

Critics of vaporizers with aluminum heating elements cite health risks associated with exposure to aluminum, namely an increased risk of Alzheimer’s. It is important to note two things here. The first is from the Storz & Bickel FAQ page:

“Q. Does the aluminum heating block emit any substances which are subsequently inhaled by the user?

A. No. the top temperature reached in the heating block 240°C (464°F) is by far below the temperature that is needed to emit any substances out of the aluminum alloy AlMgSi, melting point 660°C (1220°F); boiling point 2519°C (4566°F) used by us. This is documented by an analysis of the air produced by the Volcano on top temperature made by the University of Leiden, Netherlands.”

So a well designed aluminum heating elements seem to be quite clean.

As for the increased risk of Alzheimer’s: it’s hard to be certain whether something does or does not play a role in the development of Alzheimer’s because the illness itself is not completely understood, but aluminum does not appear to significantly increase a person’s susceptibility. These articles from Scientific American and Alzheimer’s.org discuss this conclusion in depth.

Examples of vaporizers with good aluminum heating elements: Volcano, herbalaire

#3: Glass

Glass is basically the same as ceramic when it comes to heating elements. Only one vaporizer with an all-glass heating element is currently available: the Vapolution Vaporizer.

Water Vapor Affects A Building Structure

Water Vapor (“WV”) can have harmful effects on buildings and structures and can damage buildings in the form of dry rot, corrosion, and mold growth. In recent years, scientific studies have been conducted on how it affects structures and what can be done to make structures more resistant to its effects.

What is Water Vapor And What Are Its Effects?

WV is the gaseous form of water in the air that creates condensation in the exterior and interior of buildings and can pass through walls or is spread by air currents. Materials can be either porous or non-porous to water vapor. Porous materials include wood, insulation, and other building masonry materials that readily absorb WV and once overloaded, create liquid and condensation. This creates a perfect storm of conditions for rot and mold.

Where Does Water Vapor Occur?

  • How Does It Get In?
  • Vapor Drive
  • Perm rating

Condensation can be found in walls, roof cavities, and the interior windows of structures. In general, the most common places condensation develops are within the wall, under wallpaper, the ceiling, and around window areas. Outside, condensation can build up on the roof and the exterior walls of a building. The most common way water vapor gets in is by air leaks found on a structure, such as wall openings but it can also be spread by mechanical means like air conditioning units. Also, the more humid the climate you live in, the more water is found in a home or building. Diffusion is another method WV creates condensation. Diffusion happens when water molecules move from a high moisture level to a low moisture level.

When WV passes through a fixed surface like a wall, the force of the water molecules is called the vapor drive. The greater the concentration of water molecules and the more extreme temperature difference, the greater the vapor drive. Vapor drive causes condensation to occur on cool surfaces. Each part of a building and its materials will have a different resistance to vapor drive. This is called a perm rating.

How To Keep Water Vapor At Bay

Perm is short for permanence and it uses such factors, as permeability and thickness of materials, for resistance to vapor drive.

  • Perm Ratings
  • Air Barrier And Vapor Barrier Explained
  • Types Of Air Barriers
  • Types Of Vapor Barriers

A Perm Rating of a Class I vapor material stops WV while Class III is considered permeable to water. Since WV is transported by air and vapor diffusion, there are two methods to stop water vapor.

Air barriers protect buildings from moisture transported by air while vapor barriers stop water vapor from vapor diffusion. Air barriers come in different forms and shapes and enclose and seal all six sides of a structure to protect it and control air leaks. They can range from spray-on foam to flexible wraps. They are usually placed in the exterior side of a building because it allows for an easy set-up and less complications. However, air barrier should always be placed where there are high amounts of water vapor in the building. That is because wetness from diffusion is highest in those areas as it moves to a lower moisture levels. Vapor barriers are usually installed and restrict water diffusion through the building. Examples of vapor barriers include membranes, coatings, and foam insulation.

Dry Steam Vapor Cleaner

The very best Dry Steam Vapor Cleaning products utilize a profound technology that has revolutionized the way to provide the cleanest possible home and office environments – TANCS!

First, it would be intelligent to take a step back and reiterate the nature of a Dry Steam Vapor Cleaner. This cleaning product – in it’s best and most popular form – typically resembles a small beach ball with an attached hose. Inside the body of the Vapor Cleaner resides a boiler (the best boilers are stainless steel) which will heat water to a bit over 300F. At this temperature, an intense, dry steam is formed.

This steam is then dispersed in a controlled fashion through the hose and out through whatever particular accessory is mounted to the end of the hose (or, wands mounted on the end of the hose). This method of cleaning – developed in Europe in the 1980’s – allows for cleaning virtually any surface using the awesome power of steam – without chemicals!

This has three immediate benefits. The first is that oneself can clean windows, rugs, floor, walls, upholstery, etc. in a living room, or, the toilet, the sink, the shower, the tile, etc. in the bathroom, and the stove, the counter, the floor, the dishwasher, etc. in the kitchen. Almost any kind of surface can be cleaned using this process.

The second benefit is that the process of cleaning is highly effective. The power of dry steam (called “dry” because the water content in a first-quality dry steam vapor cleaner is only about 5%) to clean and disinfect is terrific. The activity of the heat in the steam lifts soils very quickly with a minimum of effort from almost any surface. While the particular nozzle being used for any particular task has to, of necessity, be moved across the surface, it is not typically used in a forceful, scrubbing action – the heat does the cleaning.

The last benefit is that this cleaning process is accomplished without chemicals. Chemicals invariably contain toxins. Toxins are detrimental to human health and, by eliminating the toxins from the cleaning process, one is able to clean “chemical-free” – a huge advantage in the cleaning process. TANCS is the only technology world-wide that ensures that the cleaning process results in disinfection of the surface being cleaned – without chemicals!

What is TANCS?: TANCS is an acronym for Thermal Nano Crystal Sanitation. This is a worldwide exclusive on a proprietary water treatment component.. This device results in a product that is the ultimate microbe killer. Using this process, nano crystals are formed within tap water. When this water is superheated these crystals accelerate and operate like nano cluster bombs.

HOW DOES TANCS WORK?: TANCS destroys micro-organisms by disruption of the cell membrane. Due to the activity of the nano crystals, the cell membranes are destroyed on contact.

HOW EFFECTIVE IS IT?: Nelson Labs of Utah certified that a 7-second exposure to TANCS steam vapor produces a 5 – 7 log reduction in microbes and was consistently achieved on all microbes tested. This is thousands of times better than any direct-applied water disinfecting process using chemicals. Chemical disinfection requires dwell times of several minutes. This means that, to kill microbes, the chemical has to be thoroughly applied – generally in the absence of any soil load (meaning, the surface has to be completely free of all soils first) – and allowed to soak without drying for up to ten minutes. In addition, most sanitizers and disinfectants stipulate that they are not effective on non-porous surfaces (read, countertops). Simply stated, most chemical usages for disinfection in the field (i.e., your house or office) can be ineffective. TANCS, on the other hand, not only disinfects immediately, it works thousands of times better.

WHAT IS THE DIFFERENCE BETWEEN DISINFECTION & SANTIZING: Sanitizing is defined as killing microbes; but, only a percentage of them. Disinfection is almost a complete kill process – everything ceases wiggling…

HOW IS TANCS USED?: TANCS is available only as a component part of a LadyBugXL Dry Steam Vapor Cleaner.

WHAT IN THE WORLD IS THAT LADYBUG THING? A Dry Steam Vapor Cleaner uses a simple, wonderful cleaning process whereby the awesome power of steam is safely utilized to enable fast, effective cleaning of almost any surface – without chemicals. This includes walls, windows, mirrors, grout, floors of any type including wood, ceramic & tile, rugs, upholstery, pillows, mattresses, stoves, refrigerators, toilets, showers & tubs, patio, deck, etc. The process cleans instantly with a minimum of effort, and, with the proper temperature, sanitizes. In the case of the LadyBugXL or LadyBug Tekno models with TANCS, it will disinfect.

EUROPEAN VAPOR CLEANERS: The wide-spread use of Steam Vapor Cleaners has been common in Europe for almost three decades. All the best equipment is made in Europe – they have the technology and the track-record. There has recently been a surge of low-priced models available from manufacturers in the United States; however, typically, they have no quality. It is the old but true (albeit ungrammatical) adage that you get what you pay for.

300 F TEMPERATURE: A good Steam Vapor Cleaner, at a minimum, has to do one thing very well. It has to produce a steam that is above a certain temperature – approximately about 3000 F; otherwise, by the time the steam travels the distance required from the unit to the end of the particular accessory being used, it is little more than a warm/hot mist. Not only will this not adequately clean the surface, it simply won’t sanitize – the temperature is much too low.

The sanitizing capability is one of the key abilities of a good-quality Steam Vapor Cleaner. Such a unit, at the proper temperatures, will sanitize a surface being cleaned – dust mites, mold, bacteria, fleas, etc. will be destroyed without the use of harsh or environmentally damaging chemicals! As well, a good Steam Vapor Cleaner removes the “drudge” from household or office cleaning chores – the steam does the work! It is amazing how easy it is to clean with one of these units.

ACCESSORIES: A good Steam Vapor Cleaner also provides for a complete set of accessories for any conceivable cleaning task. The uses to which a Steam Vapor Cleaner can be put, then, are almost endless – the proverbial 1001 tasks become much easier and faster with a Steam Vapor Cleaner. The accessories enable cleaning and sanitizing in one, simple operation. Windows, floors (ceramic and hardwood), carpets & rugs, upholstery, drapes, mini-blinds, kitchen countertops, sinks and appliances (degrease and remove baked-on deposits on the stove or in the oven without caustic oven degreasers or the damaging, high heat of self-clean ovens), showers, tubs, toilets, nurseries, pet areas, etc. – all can be cleaned, deodorized and sanitized with a minimum of effort.

CONTINUOUS FILL/USE: It is cautioned that the consumer purchase a unit that offers a continuous-fill feature. If this is not available, the user has to halt cleaning in the middle of the task, carefully bleed off the pressure from the chamber, refill and then wait an average of fifteen minutes for the unit to reheat the water. This is an annoyance and a great inconvenience. A continuous-fill unit, on the other hand, “beeps” the user to alert them to add water to the non-pressurized water reservoir, and the cleaning process can continue with absolutely no “downtime”. This is a major advantage found only on the better systems.”